Ranger DX600R

Inquire about this Equipment

RangerTM DX600R drill rig is a hydraulic, self-propelled, self-con­tained, crawler-based surface drilling unit equipped with a radio remote control panel and rod handling system. Ranger DXR series is designed for efficient top hammer drilling in difficult terrain where a drill rig with an operator’s cabin is not feasible. RangerTM DX600R hole size is designed for drilling 64 – 102 mm (2½” – 4”) holes.

Hole diameter 64 – 102 mm 2.5 – 4 in
Rock tools 38, 45 or 51 mm (1½”, 1¾” and 2”)
Rock drill 17.5 kW
Engine output 168 kW
Flushing air 6,2 m3/min, up to 10 bar
Production capacity 2200 m3/8h
Total weight 15600 kg
Width (m) 2.45 m
Transportation height/Tramming height a/b, 3.2 m/3.6 m
Transportation / Tramming height with safety cage 3.3 m/3.8 m
Total length 11.3 m/8.4 m
ROCK DRILL SANDVIK
Rock drill HL 650
Rock tools 38, 45, 51 mm
Operating pressure 100 – 170 bar
Percussion rate 55 Hz
Percussion output power 17.5 kW
Maximum rotation torque 1 325
ype Track mounted
Track type FL 6
Grouser plate width 310 mm
Ground contact length 2590 mm
Ground clearance 440 mm
Oscillation angles -10 – +10 °
Tramming force 121 Kn
Tramming speed 3.5 km/h
POWERPACK SANDVIK
Engine type Caterpillar C 7.1
Max. tilt angles -45 – +45 °
Number of cylinders 6
Engine output 168 kW / 1 800 rpm
Screw compressor type Enduro 12
Air flushing capacity 6,2 m3/min
Flushing air pressure 4 – 10 bar
Air filters 2 pcs., with ejector and safety element
Fuel tank 380 l
DEF tank AdBlue, 24 l (Tier 4)
DUST COLLECTOR SANDVIK
Capacity/vacuum 23 m3/min at 1 000 mm vacuum H2O
Filter elements/material 13 pcs/fiber
Total filter surface 10.4 m2