Specifications are subject to change without notice (Thursday, November 23, 2023)
R45P
The Rammer R45P is your strong partner for a wide range of breaking duties for carriers between 32-53 tons. The 2,950 kg hammer has been designed with proven Rammer features and standards.
The Rammer R45P Performance Line hammer incorporates the latest evolution in long proven breaking technology. The profitable R45P offers more than just excellent power-to-weight ratio, it offers the quality reassurance that only a true Rammer hammer can.
Enquire about this equipment
Contact us-
Features
- Twin handedThe twin handed design allows optimal mounting on both left and right handed carriers, prolonging the service life of the hose connections. Easy installation for hydraulic quick hitch mounting brackets.
- Vibration and sound suppressedLess vibrations and at the same time significantly lower noise levels are achieved with this ultra-modern, low-wear design. This protects the operator, the carrier and relieves the environment. This extends your range of applications on narrow job sites and wherever noise protection is required.
- Flange mountingThe Flange mounting design allows for the use of existing mounting plates, as well as carrier and application specific customization.
- Stone claws on housingStone claws are ideal wear parts for material handling, especially useful in boulder breaking and in concrete demolition.
- Idle blow protectorThe Idle Blow Protection (IBP) ensures the hammer cannot be operated until pressure is placed on tool. This eliminates tie rod stress, reduces oil overheating and protects against premature failures.
- Fast-change tool systemQuick and safe tool change system transverse to the hammer. No need to reach under the hammer during tool change.
- RAMLUBE IIThe RAMLUBE II is a state-of-the-art, convenient and automatic lubrication system for RAMMER hydraulic hammers, which significantly extends the service life of wearing parts. The RAMLUBE II is mounted on your hammer housing and is a self-venting impulse lubrication system. The grease volume of the RAMLUBE II can be externally adjusted. We recommend to use our original Rammer tool greases, which are developed for hammer applications. There are available three different greases: original Rammer Tool Grease for standard applications, Rammer Meissel Paste for special applications and Artic Tool Grease for cold climate conditions.
- RD3 incl. SAM (optional)RD3 for SAM optional for factory installation. Please consult your distributor for proper version. Online hour meter and location tracking in Google MapsTM
- RD3 incl. SAM (retrofit)RD3 device for SAM service available for retrofit installation. Please consult your distributor for proper version. Online hour meter and location tracking in Google MapsTM
- Original RAMMER toolsAll our experience reflects the unique quality and reliability of RAMMER original tools. You are advised to choose the right RAMMER tool for every application. This will increase your production and reduce your costs.
- Piston type accumulatorThe nitrogen piston accumulator is a safe and durable design, thanks to the use of the latest sealing technologies, . Fail-safe operation, high impact energy and simple and fast service help to improve your operating results.
- Excellent power-to-weight ratioRAMMER sets the standard in the industry with these outstanding values in the power-to-weight ratio. The impact force has been increased and at the same time the operating weight has been optimized.
-
Applications
- Primary demolitionDemolition of standing buildings and structures.
- Secondary demolitionDemolition of larger pieces on the ground (size reduction, separation and preliminary sorting tasks)
- RecyclingRe-using parts or material which has been extracted from existing buildings or structures. Recyclng of products: Re-use of material or parts as such Recycling of material: Re-use of material for other purposes
- Primary breakingHammer fitted to an excavator working directly in a bench to breaks away rock which can then be removed by truck. This is most commonly used where blasting is not allowed.
- Secondary breakingWhen blasted rock is too big for the feeder or crusher, secondary breaking is needed to get the boulders down to size. The type of rock dictates the effectiveness of the process, with brittle rock giving the best performance.
- RentalRental includes most applications
-
Specification
Minimum working weight, flange mounted *1 3250 kg 7165 lb Weight 2600 kg 5732 lb Impact rate (frequency) 360 – 630 bpm Operating pressure 160 – 180 bar 2320 – 2610 psi Oil flow range 200 – 250 l/min 52.8 – 66.0 gal/min Pressure relief setting *2 210 bar 3045 psi Pressure relief max 230 bar 3335 psi Back pressure max 10 bar 145 psi Input power 75 kW 101 hp Tool diameter 165 mm 6.50 in Pressure line connection (IN) SAE 6000 psi 1 1/4 Return line connection (OUT) SAE 6000 psi 1 1/4 Pressure line size, min. inner diameter 26 mm 1.02 in Return line size, min. inner diameter 32 mm 1.26 in Optimum oil temperature 40 – 60 °C 104 – 140 °F Allowed oil temperature range -20 – 80 °C -4 – 176 °F Optimum oil viscosity at operating temperature 30 – 60 cSt Allowed viscosity range 20 – 1000 cSt Carrier weight, range *3 32 – 53 t 70500 – 116800 lb Noise level, measured (2000/14/EC) 124 dB(A) Noise level, guaranteed (2000/14/EC) 128 dB(A) *1 Includes average mounting bracket and standard wear parts
*2 Minimum setting = actually measured operating pressure + 50 bar or 725 psi
*3 Check carrier allowed attachment weight from carrier manufacturer. Check application requirements.
